SatKing 800CA 12V/240V VAST Satellite Decoder

Product image 1SatKing 800CA 12V/240V VAST Satellite Decoder
Product image 2SatKing 800CA 12V/240V VAST Satellite Decoder
Product image 3SatKing 800CA 12V/240V VAST Satellite Decoder

OUR PRICE - Regular price $279.00

This unit is no longer available. Please see the SatKing DVBS2 980CA Twin Tuner VAST Satellite Receiver.

The Satking 800CA VAST certified satellite decoder without a doubt the most popular VAST decoder for caravan satellite system. It is just 220mm wide and will fit in any entertainment cabinet at home or on a shelf in a caravan.

The Satking DVBS2-800CA is PVR ready so you can record the programs direct to a USB stick or drive (not included). It can be powered via either 240v mains power or a 12v cigarette lighter lead. Power consumption is a mere 9 watts so it is economical to run whether from the transformer or from the battery of your van.

 

On the rear panel, you'll find:

 

 

  • Single satellite input and "Loop Out" connections (the "Loop Out" is used to connect multiple decoders together).
  • HDMI socket to deliver the best quality picture to your TV.
  • USB port. You can attach a USB stick or USB hard drive to this input and record TV direct to the drive.
  • AV composite video and component video outputs (only use if your TV does not have a HDMI input)
  • IR sensor input (to connect an InfraRed extender)
  • 12V DC input from either the 240v transformer or 12v cigarette lighter lead.
  • Ethernet port.
  • SP/DIF and coaxial digital audio output for connection to surround sound systems.

The external IR sensor port gives you the option to mount the decoder in an overhead cupboard in the van or in an enclosed entertainment unit yet still operate from the remote control. It is a simple as plugging one end of the IR sensor (purchased seperately) into the rear of the decoder and sticking the other end within line of sight of your remote control.

All functions of the remote control can be used this way without the need to open the cupboard. This is a fantastic feature and the SatKing DVBS 800CA is the only VAST certified satellite decoder that offers this feature. We have 2 sensors available for the SatKing 800CA - 1 metre or 3 metre.

On starting up the 800CA, the first screen you'll see will be the following:

 

satking boot

 

The screenshot above shows that the decoder is searching for signal. When the dish is aligned, the decoder will immediately change to the scanning screen (below) and load all channels.

 

satking tune

 

 

Whether using this decoder for home or on the road, you'll get access to all of the available VAST channels. 

 

Manufacturers Description

The SatKing DVBS2-800CA VAST Satellite certified high definition satellite receiver brings a new level of features to the Australian VAST platform. Designed with ease of use in mind customers will find this VAST receiver a pleasure to use. From first turn on you will notice the unit is super fast to turn on and scan in channels, the Optus VAST card is already loaded in the decoder for you.

A large remote control with easy to read and use buttons with built in learning function to take over basic controls of your TV (no need for two remote controls any more). The compact design is a real winner measuring 220mm in width and very low power consumption, well below 15 watts.

With PVR ready via USB as standard simply connect your external USB device to use to unit as a PVR. You will also find a fast operating and easy to read 8 day Electronic Program Guide (EPG).

The unit can be used for either VAST traveller customers (12 Volt) or VAST at home customers (240 Volt) via the included power pack.

For self installation SatKing has developed an internal signal finder with an intensity beeper to assist with installations, the higher the signal the faster the beeping and an electronic map built in to give you your coordinates for easier dish positioning.

The unit also has a detailed electronic help guide and handy features like a USB speed test to test your USB device. For the VAST traveller caravan market the unit also has an optional IR target so you can place the VAST decoder in a cupboard and hide the unit out of sight, also handy to place the unit behind large screen TV’s in home when you don’t want to look at the STB.

Commercial installations and customers with older TV’s will find the built in RF modulator of great assistance, you can simply use the SatKing decoder on any TV new or old without any extra expense.

 

Features:

  • Australian VAST certified
  • High definition MPEG-4
  • 12/240 Volt operation for home or RV use
  • Compact size 220 mm x 180 mm x 47 mm
  • Friendly bright coloured menu
  • Signal finder with beeper
  • USB PVR ready as standard (compatible with most drives and memory sticks)
  • Large button remote with learning functions
  • Fast operating 8 day EPG
  • Infrared target (optional)
  • Parental control
  • Time shift function via PVR
  • Program auto tune with reminder
  • HDMI output
  • Component output
  • CVBS output
  • RF modulator
  • Digital audio (Coaxial & S/PDIF)
  • Dolby digital audio
  • LNB loop out (for connection to another decoder)
  • USB-2.0
  • USB speed test
  • DiSEqC 1.0/1.2 supported
  • Adjustable LNB settings
  • Low power consumption (less than 15 W)
  • Over the air software download supported
  • Subtitles supported
  • IRDETO secure silicon inside.

System

CPU: STi7111
Processor: Speed 450 MHz
Flash memory: 16 MB (NOR) + 128 MB (NAND)
DDR: 256 MB
EEPROM: 32 kB

 

Tuner

Input Frequency: 950 ~ 2150 MHz
Loop out frequency: 950 ~ 2150 MHz
Signal level: -25 dBvM ~ -65 dBvM
Impedance: 75Ω
Symbol rate DVBS: 2 ~ 45000
Symbol rate DVBS-2: 2 ~ 45000
Standard: DVB-S (EN300 421) DVB-S2 (EN302 307)
Demodulation: QPSK, 8PSK
DiSEqC: 1.0, 1.2 USALS compatible
22 kHz Tone: 22 kHZ + 2 kHz
LNB Power: 13V/18V 500mA Max
FFC Mode: QPSK: 1/2, 2/3, 3/4, 5/6, 7/8
                8PSK: 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9
Reed Soloman: 204, 188, t = 8

 

Demultiplexer

Standard: ISO/IEC 13818-1
Input max: 120 Mbps (Serial) and 15 Mbps (Parallel)

Video Decoder

Standard:ISO/IEC 13818-2, MPEG-2 MP@HL,
                 MPEG-4 AVC/H.264 
MP@L4.1HP@L4.1
Aspect: 4.3, 16:9
Video resolution: 1080i, 720p, 576p, 576i

 

Audio Decoder

Standard: ISO/IEC 13818-3
Decoding: MPEG-1 and MPEG-2 Layer I and II, Dolby AC3,
                   MPEG-4 HE-AAC+
Output mode: Mono, Dual-Channel, Stereo
Sampling frequency: 32, 44.1, 48 kHz
Audio output Ω: Low

 

Conditional Access

Standard: IRDETO: Secure silicon
Smart card reader: ISO 7816

 

RF Modulator

Channel range: 21 ~ 69 UHF

 

Power

Voltage range: 10 ~ 16 VDC
Power consumption: Dimensions: 220 mm (W) x 180 mm (D) x 47 mm (H)
Weight: 750 grams
Operation temperature: 0 ~ 40 °C

 

Connections

Satellite in: F-Type Female
Satellite Loop out: F-Type Female
CVBS: 1 x Video, 1 x L + R
HDMI: 1 x 1.4a
Component: 1 x YPbPr
RF Modulator: 1 x PAL Male, 1 x PAL Female
Digital audio: 1 x S/PDIF, 1 x Coaxial
USB: 1 x USB 2.0
Ethernet: 1 x RJ-45
Serial port: 1 x RS-232 (9 Pin Din)
Infrared sensor: 1 x 3.5 mm jack (sensor optional)
Power: 1 x 2.1 mm Jack

 

Accessories

AV Cable: 3 RCA to 3 RCA Video and Audio
240 Volt power pack: 1 x 12 Volt 2AMP pack AC 100 ~ 240 Volt 50/60 Hz
RCU: Remote with learning function
Batteries: 2 x AA
User manual: A5

Shipping

Open tab

Turnaround

Most items are kept in stock in at all times. Orders placed before 12-midday on business days are usually shipped the same day. All other orders will be shipped on the next business day after the order is placed.

Carriers

The carriers we use to deliver our orders include Australia Post, Startrack Express, TNT and Fastway Couriers.

Order Tracking

Almost all of our carriers provide tracking numbers. If a tracking # is provided by the shipping carrier, we will update your order with the tracking information. Please note that some orders may not have tracking numbers depending upon the method used.

Shipping Rates

We offer nation-wide shipping on all of our products. Shipping will be calculated at the checkout and the size and weight of you order will be used to calculate the actual shipping price. At the checkout you will have the opportunity to cancel your order if you are not happy with the quoted shipping price. We retain the right to cancel any orders where the actual cost of shipping substantially exceeds our allocated rate.

Returns

Open tab

We rarely experience faults with our products. If you think your product is faulty we will remedy the problem.

If you need to return an item to us please ensure you follow these steps:

  1. Call us on 0457 211 833 or email us on info@travelsat.com.au with an explanation of the problem.
  2. If we cannot resolve the problem we will issue you with a Return Authority (RA) Number to track your return.
  3. You will need to organise the return shipping and pay the shipping costs. We recommend that you use a method where the item can be tracked and we recommend you insure the item to protect your interests.
  4. If we examine the item and it is confirmed to have a problem we will refund your return shipping costs so please keep your receipts.
  5. If not fault is found with the item we will contact you to arrange for the item to be returned to you.  Under these circumstances you will be responsible for all shipping costs.
  6. If the item is found to have a fault we will discuss with you your rights to a repair, replacement or refund in accordance with the Australian Consumer Law.

For more information please visit our Shipping & Returns page.

Close (esc)

Popup

Use this popup to embed a mailing list sign up form. Alternatively use it as a simple call to action with a link to a product or a page.

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.

Search

Shopping Cart

Your cart is currently empty.
Shop now